SCADA, Controls & Instrumentation in Malaysia

PaxMagflo Electromagnetic Flowmeter

Features
o Measurement is not affected by the variation of flow density, viscosity, temperature and pressure
o No obstacle in the pipe, no pressure loss and lower requirement for straight pipeline
o Programmable low frequency square wave field excitation, improving measurement stability
o Full digital processing, high noise resistance and reliable measurement
o High flow turn down ratio 150:1
o High definition LCD display with backlight
o RS485, RS232, HART interface supports digital communication
o Intelligent empty pipe detection and electrodes resistance measurement diagnosing
o SMD measurement and surface mount technology (SMT) are implemented to improve reliability
o Power off time memory function

PaxSonic Ultrasonic Level Transmitter

Features
 Prominent anti-vibration performance
 Using SMD technology to enhance performance and reliability
 Auto tune and temperature compensation function
 Using advanced detection technology and rich software suitable for various conditions
 Using advanced wave shaping technology to enhance accuracy
 Anti-interference of echo for measurement accuracy
 Using 16 digit D/A converter to enhance current accuracy and resolution
 PTFE material of sensor suitable for various conditions

PaxPTrans Pressure Transmitter

Features
o Measurement of gauge pressure, absolute pressure and vacuum pressure with wide range.
o Overload is strong.
o Can measure micro pressure without liquid medium.
o Can be operated with display.
o Small temperature drift where both sensor and conversion circuit have temperature compensation function.
o Null point and measuring range of the measuring circuit are continuously adjustable for calibration and span shift.
o Fully enclosed construction for long term outdoor harsh environment.
o Easy installation due to its small size.

Specification
 > Model: PXMF-1000
 > Pipe Size: 15 mm to 3000 mm
 > Accuracy: ± 0.5%
 > Max Pressure:  ≤ 4.0 MPa
 > Conductivity: ≥ 5µS/cm (Purity Water > 20µS/cm
 > Output Signal: 4-20 mA; Pulse 0-2 kHz; RS485; HART
 > Medium Temperature: 0-150 dec C
 > Power Supply: AC220V or DC24V
 > Flange Meterial: SS/CS
 > Converter Type: Integral , Remote
 > Protection: IP65 / IP67 / IP68
 > Liner Material: Chloroprene rubber; Polyurethane; PTFE
 > Display: Instantaneous Flow Rate, Total Flow, Flow Velocity
 > Flow Direction: Forward, Reverse
 > Electrode Material: 316L, Pt, Ta, Ti, HB, HC
 > Electrode Type: Standard, Blade, Removable
 > Alarm (NO): Empty, Excitation, High/Low Flow Rate limit
 > Ambient Temperature: -25 to +60 deg C, Humidity: 5 to 90%
 > Explosion Proof: Exib II CT4 (optional)

Application
Measuring the volume flow of conductive fluid in a closed pipeline. Widely applied in the flow measurement and control in the fields of chemical and petroleum industry, metallurgy industry, water and waste water, agriculture and irrigation, paper making, food and beverages industry and pharmaceutical industry.

Specification
 Model: PXUS-300
 Range: 5m, 10m, 15m, 20m
 Accuracy: ± 0.25%
 Resolution: 1mm
 Blanking distance: 25 to 60 cm
 Application Temperature: -20 to 65 deg C
 Output Signal: 4-20 mA; RS485
 Power Supply: DC24V
 Display Type: Moulded Light 16X2 LCD Display
 Display Method: Level, relay working state, signal intensity
 Protection: IP67
 Housing Material: ABS or PTFE

Application
 Level measurement of liquids or granules.
 Liquids or solids measurement such as tank, trough, pond, wells, canals, metering box, granary, silo, etc.

Specification
o Model: PXPT-100
o Medium: Liquid, Gas, Steam
o Measured Range: -100 Kpa to 30 Mpa
o Accuracy: ± 0.5% FS
o Max Pressure:  3x FS
o Output Signal: 4-20 mA
o Medium Temperature: 0 to 70 deg C
o Power Supply: DC24V (12-36V)
o Protection: IP65
o Material: Die-Cast Aluminum Alloy
o Enclosure: Surface Epoxy Spray
o Diaphragm: 96% Aluminum Oxide Porcelain
o Connection Material: 1Cr18Ni9Ti Stainless Steel
o Ambient Temperature: -20 to +70 deg C
o Humidity: 0 to 95% RH
o Explosion Proof: Exib II CT5 (optional)

Application
o Measuring the pressure of liquid, gas or steam and converts the pressure signal to a standard 4-20 mA current signal which can be transmitted to a secondary instrument or process control systems.
o Widely applied in the pressure measurement and control in the fields of chemical, petroleum, power generation, paper, metallurgy, water and waste water, agriculture and irrigation.